Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Washer

Maytag Top-Load Washer Code oL: Load Too Large for the Tub

oL means overloaded. On Maytag top-load HE washers with electronic control, such as the MVW6230HW and MVWC565FW, it appears when the load is too large. On the older Bravos MVWB series, such as the MVWB765FW, the…

Low risk · DIY check OK
Book a House Call(713) 936-6390
Code
oL
Appliance
Washer
Brand
Maytag
Warranty
30-day workmanship

What oL means

oL means overloaded. On Maytag top-load HE washers with electronic control, such as the MVW6230HW and MVWC565FW, it appears when the load is too large. On the older Bravos MVWB series, such as the MVWB765FW, the washer tries to fill and begin the wash, and if it senses an overload it drains any water and detergent that was added. The Bravos is an older washer, yet many households still use one, and we service it. If a repair would not pay off, we will tell you so.

Common causes of oL

  • Too many clothes, or bulky items soaking up water
  • Heavy items that make the load unbalanced as well as large
  • The load sensing, if a normal load keeps triggering oL
✓ One safe check you can try

1. Cancel the cycle by pressing the Start button or by disconnecting the power cord. 2. Remove several items from the basket. 3. On a Bravos, add detergent, shut the lid and press START. 4. On other models, run a drain-only cycle if water is present, then restart with a smaller load.

! Why to stop there
  • A small load that still shows oL points to the load sensing instead of the basket
  • We check how the washer weighs the load and how it fills
  • The price is in writing first, and we tell you plainly if an older Bravos is past saving
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

uLMaytag Bravos Washer Code uL: Unbalanced Load, Correction Routine Running Wash Light On or FlashingMaytag Top-Load Washer Wash Light On or Flashing: Water Level Not Changing Ofb or uLMaytag Top-Load Washer Code Ofb or uL: Load Out of Balance, Hands Needed PFMaytag Washer Code PF: Cycle Interrupted by a Power Failure Rinse Light OnMaytag Top-Load Washer Rinse Light On: Spray Rinse Is Running SdMaytag Bravos Washer Code Sd: Suds Reduction Routine at the End of the Wash Sensing or Fill LightMaytag Top-Load Washer Sensing or Fill Light: Auto Sensing Is Measuring the Load SrMaytag Neptune Washer Code Sr: System Relay Problem
oLoL questions
What does oL mean?

The load is too large for the washer. It senses the overload and stops, and on a Bravos it drains any water and detergent it had already added.

Do I add detergent again on a Bravos?

Yes. After removing several items, the Bravos instructions say to add detergent, close the lid and press START, because the first dose of water and detergent drained away with the overload.

What if a small load shows oL?

Then the load is not the issue and the sensing needs testing. We quote in writing first, and our repairs carry a 30-day workmanship warranty.

Book a visit

Still unsure about oL?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390