Maytag Commercial-Grade Washer: All Lights Stay Lit
On Maytag Commercial-Grade Residential washers, a display where every indicator light stays on is treated as an error condition. The brand's guidance points first to a control that needs a reset and then to the water…
- Code
- All LEDs remain lit (error code)
- Appliance
- Commercial Laundry
- Brand
- Maytag
- Warranty
- 30-day workmanship
What All LEDs remain lit (error code) means
On Maytag Commercial-Grade Residential washers, a display where every indicator light stays on is treated as an error condition. The brand's guidance points first to a control that needs a reset and then to the water supply, since the washer expects both hoses connected and water reaching the inlet valve. You may see the washer refuse to start, or sit with all lights lit and no cycle. Many owners find a closed faucet, a kinked hose, or a clogged inlet screen behind it.
Common causes of All LEDs remain lit (error code)
- Control that needs a power reset
- Hot or cold faucet closed or only partly open
- Inlet hose kinked, or a hose not attached
- Clogged screens at the inlet valve
- Inlet valve not passing water
1. Unplug the washer for 10 seconds, then plug it back in. 2. Make sure both the hot and cold faucets are fully open. 3. Check that both inlet hoses are attached and not kinked behind the washer. 4. If you are comfortable doing so with the water off, check that the inlet screens are not clogged. 5. Try a short cycle and watch whether water enters.
- If the lights stay lit after a reset and full water flow, the control or the inlet valve may be the cause
- We check water flow at the valve and the control response together
- You get a written price before any part is ordered or installed
Other Commercial Laundry codes
Why are all the lights lit at once?
It is the control's way of showing an error condition rather than a normal cycle state. The first things to rule out are a control that needs a reset and a water supply that is not reaching the washer.
Does unplugging the washer really help?
Leaving it unplugged for 10 seconds lets the control restart. If the lights return when you plug in again, the cause is more likely the supply or the inlet valve than a one-time glitch.
Is a clogged inlet screen common?
It is one of the easy checks, especially in older homes with sediment in the lines. If the screens are clean and water flows, the problem is probably elsewhere and we test it on site.
Still seeing All LEDs remain lit (error code)?
A technician diagnoses it on site and gives you the price in writing before any work starts.