Error code · Dishwasher

Maytag Dishwasher Code F7E2: Wash Motor

Medium · inspection needed

Code: F7E2
Appliance: Dishwasher
Brand: Maytag
Warranty: 30-day workmanship

What F7E2 means

F7E2 on Maytag built-in dishwashers with electronic control is described as a wash motor error. The wash motor drives the spray action that cleans the dishes, and the control is reporting a problem with how that motor is running or being driven. On the Clean light you see seven flashes, a pause, and two flashes. Cycles may stop partway, dishes may stay dirty, or you may hear the motor try and quit.

Common causes of F7E2

Wash motor not running as commanded
Connection to the wash motor
Something restricting the spray arms or pump
Control, after the motor and wiring test good

✓ One safe check you can try

1. Cycle the power: with a hard-wired dishwasher, turn its breaker off for 30 seconds and back on; otherwise unplug it for 30 seconds. 2. Run a short cycle and listen for the motor. 3. If the error returns, schedule service.

! Why to stop there

The code returning after a power cycle means the motor circuit needs testing
We check the motor, its wiring and the control that drives it
Binding in the pump area can look like a motor problem, so we check for that first

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dishwasher codes

H2OMaytag Dishwasher Code H2O: No Water Detected F3E2Maytag Dishwasher Code F3E2: Thermistor or OWI Sensor Sanitize light flashingMaytag Dishwasher Sanitize Light Flashing: Sanitizing Temperature Missed F4E2Maytag Dishwasher Code F4E2: Heating System F4E3Maytag Dishwasher Code F4E3: Water Not Heating As Expected F6E1Maytag Dishwasher Code F6E1: User Interface and Main Control F6E3Maytag Dishwasher Code F6E3: Too Many Suds F6E4Maytag Dishwasher Code F6E4: Float Switch and Leveling

F7E2F7E2 questions

Is F7E2 the motor or the control?

The code says error with the wash motor, which can mean the motor, its wiring or the board that drives it. We test each so we only replace what is needed.

The dishwasher hums but does not wash. Is that F7E2?

It can be. A humming motor that does not spin is one pattern we see with a wash motor error, though a blockage can feel similar.

Should I keep running cycles to see if it clears?

One power cycle is reasonable. Repeated attempts on a motor that struggles can make it worse, so we suggest stopping if the error comes back.

Book a visit

Still seeing F7E2?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390