Error code · Range

Maytag Range Code F2: Oven Sensor Reading

Medium · inspection needed

Code: F2
Appliance: Range
Brand: Maytag
Warranty: 30-day workmanship

What F2 means

F2 is a single code that Maytag electric and gas freestanding and slide-in ranges, including the MER8650ES, use to flag the oven temperature sensor, the control or their wiring. The control is not receiving a usable temperature reading. You see F2 on the display, and the oven may stop preheating, cut off during a bake or fail to hold temperature. This is a short code, but it covers the same circuit as the longer F2 codes with extra characters.

Common causes of F2

Oven temperature sensor
Wiring and connector at the sensor
Oven control board

✓ One safe check you can try

1. Turn off the oven and let it cool down. 2. Switch the circuit breaker off for one minute. 3. Switch it on again. 4. Monitor the oven for one minute to ensure F2 does not display. 5. Try a short bake and see that the oven behaves. Leave the sensor alone.

! Why to stop there

F2 does not tell us whether the sensor, the wiring or the control is giving the bad reading.
We test each in turn, starting with the cheapest to correct, and quote the repair in writing before starting.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Probe or Insert ProbeMaytag Range Message "Insert Probe": Meat Probe Not Detected PUSH or PSHMaytag Range Prompt PUSH or PSH: Press Start Sabbath, Sab, 5Ab or 5A7Maytag Range Sabbath Mode Display: Cancel Sabbath Mode FEE7Maytag Range Code FEE7: Broil Element Concern Flashing Time, Clock, 12:00 or Power LossMaytag Range Flashing Clock or POWER LOSS: Reset the Time H on a Range CooktopMaytag Range Cooktop Showing H: Surface Still Hot Indicator Flashing on a Range CooktopMaytag Range Cooktop Indicator Light Flashing: Stuck Touch Keys Indicator or Hot Light On a RangeMaytag Range Hot Light Staying On: Cooktop Control or Element Still Warm

F2F2 questions

Is F2 the same as F2 E1?

No. Plain F2 points to the oven sensor circuit, while the longer F2 codes with an E-number point to the keypad and control. Read the full text on your display carefully, because one extra character changes where we start looking.

Can I keep using the cooktop?

Often yes, since the code concerns the oven sensor circuit rather than the surface burners. Do not rely on the oven itself until it preheats and holds its temperature normally through a full test bake.

Is F2 a common code?

It is one we see often on older ranges that are many years old. Many of those ranges are repairable, and we tell you honestly if the cost of the work is not worth it for your situation.

Book a visit

Still seeing F2?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390