Error code · Range

Maytag Range Codes F5 E0 to F5 E7: Door Latch Family

These codes belong to Maytag electric and gas freestanding and slide-in ranges such as the MER8650ES. F5 E0 and F5 E7 point to the oven door latch assembly, the door switch or the wiring. F5 E1,…

Medium · inspection needed

Book a House Call (713) 936-6390

Code: F5 E0, F5 E1, F5 E2, F5 E3 or F5 E7
Appliance: Range
Brand: Maytag
Warranty: 30-day workmanship

What F5 E0, F5 E1, F5 E2, F5 E3 or F5 E7 means

These codes belong to Maytag electric and gas freestanding and slide-in ranges such as the MER8650ES. F5 E0 and F5 E7 point to the oven door latch assembly, the door switch or the wiring. F5 E1, F5 E2 and F5 E3 point the same way but for the main oven door, which matters on double-oven ranges. The control cannot confirm the latch state. Owners see the code, and the oven may not run a bake or clean cycle, or the door may stay locked.

Common causes of F5 E0, F5 E1, F5 E2, F5 E3 or F5 E7

Door latch assembly on the oven involved
Door switch
Wiring to the latch and switch
On double-oven ranges, the main oven door circuit specifically

✓ One safe check you can try

1. Let the oven cool, then close the door squarely and clear its edge. 2. Set the range's breaker to off for one minute, then restore it. 3. Switch it on again. 4. Monitor the oven for one minute to see whether the code reappears. 5. Verify oven operation without forcing the door.

! Why to stop there

It is not obvious from the code which oven or which part is responsible on a double-oven range.
We test the latch and switch on the correct oven and quote the work in writing before we start.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Probe or Insert ProbeMaytag Range Message "Insert Probe": Meat Probe Not Detected PUSH or PSHMaytag Range Prompt PUSH or PSH: Press Start Sabbath, Sab, 5Ab or 5A7Maytag Range Sabbath Mode Display: Cancel Sabbath Mode Flashing Time, Clock, 12:00 or Power LossMaytag Range Flashing Clock or POWER LOSS: Reset the Time H on a Range CooktopMaytag Range Cooktop Showing H: Surface Still Hot Indicator Flashing on a Range CooktopMaytag Range Cooktop Indicator Light Flashing: Stuck Touch Keys Indicator or Hot Light On a RangeMaytag Range Hot Light Staying On: Cooktop Control or Element Still Warm Lo or PreMaytag Range Display Lo or Pre: Oven Warming Up

F5 E0, F5 E1, F5 E2, F5 E3 or F5 E7F5 E0, F5 E1, F5 E2, F5 E3 or F5 E7 questions

Why does the code mention the main oven?

Some ranges have a second oven, and the codes for the main oven door differ from the others. If you have a single oven, the difference is only a technician's clue.

How do I tell which oven has the problem?

Notice which door will not lock, unlock or heat, and which oven stays cold. Tell us when you call, since it saves time when we trace the right circuit and bring the right parts.

Does the code mean the door is broken?

No. It means the control cannot confirm the latch state. The cause may be the latch, a switch or a wire, and we find which one by testing.

Book a visit

Still seeing F5 E0, F5 E1, F5 E2, F5 E3 or F5 E7?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390