MAH9700AW
Maytag Neptune MAH9700AW Washing Machine Repair
Most common issues on this model
- Water not draining after the cycle
- Washer that will not fill
- Control that does not respond
- Vibration or banging during spin
The MAH9700AW is a Maytag Neptune washer, listed with two other endings, MAH9700AWM and MAH9700AWW. We do not have a capacity or loading style for it, so we confirm those details on site instead of stating them.
Many Houston washers like this are installed against an interior wall with the water valves right behind them. Our first visit follows the water: valves and inlet screens for a slow fill, the drain hose and pump for water left behind, and the control for a washer that ignores the buttons. We also look at the leveling and the feet, since a washer that is out of level makes noise that sounds worse than it is.
A technician will note the exact model and serial from the plate so the order is right. The estimate is written down first, and our labor is warranted for 30 days.
Key features
- Maytag Neptune washer
- Base model MAH9700AW
- Other endings listed: MAH9700AWM and MAH9700AWW
Error codes this model can show
My MAH9700AW will not fill. What is the likely cause?
Most often the inlet screens are clogged or a water valve is not opening. We check water pressure at the hoses first, then the valves, then the control signal to them.
Why does the washer bang during spin?
An unbalanced load or an unlevel machine is the usual reason. If it persists with a balanced load, we inspect the feet, the suspension and the drum support and tell you what we find.
Can you repair it if the control does not respond?
Often we can. We confirm power to the control, check the door or lid switch and look at the board connections. If the board itself is the cause, you get the part price in writing before we proceed.
Book repair for your MAH9700AW
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.