MVWB700BW
Maytag Bravos MVWB700BW Washer Repair
Most common issues on this model
- Washer that will not spin
- Standing water after the cycle
- Slow fill
- Door or lid that does not register
MVWB700BW is a Maytag Bravos washer. We use the line and type only, and we check anything further, such as capacity, on the machine itself.
When a Bravos washer will not spin, we do not guess at the motor. We confirm the lid or door registers, then the drain, because standing water holds the spin back, and then the drive. A slow fill sends us to the faucets and hose screens. If a door or lid does not register, we test the switch and its connector, and look for anything that keeps it from closing fully. Houston laundry rooms can run warm, so we also check the control area for heat damage or loose connections.
Our technician copies the model and serial from the plate before any part is ordered. The estimate is written down first, with 30 days of warranty on the labor.
Key features
- Maytag Bravos washer
- Number MVWB700BW
- Ending BW after the base number
Error codes this model can show
My MVWB700BW will not spin. Should I replace the motor?
Not yet. A spin that does not start is often caused by the lid or door switch or water left in the tub. We test those first and the drive last.
Why is there standing water at the end?
A blocked hose or a pump that is not moving water is the usual cause. We check the hose, the pump inlet and the pump, and run a drain test before finishing.
How do you test a door or lid switch?
We check whether the control sees the switch close, test it with a meter and inspect the connector. If it tests good, the issue is elsewhere, and we say so.
Book repair for your MVWB700BW
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.