Error code · Microwave

Maytag Microwave Code F6E0: Control Board Behind the Display

Medium · inspection needed

Code: F6E0
Appliance: Microwave
Brand: Maytag
Warranty: 30-day workmanship

What F6E0 means

The F6E0 code on a Maytag over-the-range microwave tells you the oven could not run the requested function. The manufacturer points to the appliance control board, the main electronic brain of the unit, or to the wiring around it. The display shows F6E0, and the microwave may ignore your button presses or quit during a cycle. Many of these units are older microwaves that have outlived their warranty and still serve well.

Common causes of F6E0

The appliance control board
Wiring harness connections to the board
Supply voltage reaching the microwave
Board behavior after a power interruption

✓ One safe check you can try

1. Find the breaker that powers the microwave and switch it off for a full minute. 2. Switch it on. 3. Leave the microwave alone for a minute and watch for F6E0. 4. Try a short heating cycle to confirm normal operation. 5. Write down the time if the code returns.

! Why to stop there

Whether the board itself or a loose connection is behind the code cannot be seen from outside
We test supply and board outputs before suggesting a replacement
You approve the written price first

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Microwave codes

F9Q or F9Q1Maytag Microwave Code F9Q or F9Q1: Reset and Function Failure FC E1, FC E2 or FC E3Maytag Microwave Code FC E1, FC E2 or FC E3: Wi-Fi Connection Lost FC E7Maytag Microwave Code FC E7: Microwave Cannot Reach the Router FC E8 or Registration ErrorMaytag Microwave Code FC E8 or Registration Error: Setup Entry Problem Flashing 0:00Maytag Countertop Microwave Code Flashing 0:00: Clock Reset After Power Loss Flashing Colon or PFMaytag Microwave Code Flashing Colon or PF: Power Loss Notice LOC, L or Padlock IconMaytag Microwave Code LOC, L or Padlock Icon: Control Lock On No or Partial DisplayMaytag Microwave Code No or Partial Display: Blank Control Panel

F6E0F6E0 questions

Does F6E0 always mean a new control board?

No. The code points to the board or its wiring. Testing the connections and supply first often avoids replacing a part that is not the cause.

Why does the microwave seem dead with F6E0?

When the main control cannot carry out its function, it holds the unit idle. That can look like a dead microwave even though power is reaching it.

Can an out-of-warranty Maytag microwave be repaired for F6E0?

Yes. We quote in writing, and if the board costs too much for the age of the unit we say so plainly.

Book a visit

Still seeing F6E0?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390