Error code · Washer

Maytag Front-Load Washer Display 1h to 12h: Delay Wash Is Set

If the display of a Maytag front-load HE washer, such as the MHW5630HW or MHW8630HC, shows a number up to 12 followed by an h, nothing is wrong. It means Delay Wash is active, so the…

Low risk · DIY check OK

Book a House Call (713) 936-6390

Code: 1h to 12h
Appliance: Washer
Brand: Maytag
Warranty: 30-day workmanship

What 1h to 12h means

If the display of a Maytag front-load HE washer, such as the MHW5630HW or MHW8630HC, shows a number up to 12 followed by an h, nothing is wrong. It means Delay Wash is active, so the washer is waiting before it starts your cycle. Most front-load washers let you delay the start by up to 8 or 12 hours, depending on the model. Owners often see this after someone touched the plus or minus button near the display and then wondered why the washer did not start.

Common causes of 1h to 12h

Delay Wash selected on purpose
Plus or minus button pressed by accident
Delay setting left over from an earlier load

✓ One safe check you can try

1. Read the number: it is the hours left before the cycle begins. 2. To cancel the delay, follow your owner's manual for your model, or press the Cancel or Power control. 3. Close the door and start the cycle again. 4. To set a delay on purpose, turn on the power and tap the plus or minus button near the display. 5. The button's location varies by model.

! Why to stop there

If the washer shows a delay you never set and ignores your changes, the touch panel may be registering presses on its own, and we can test that.
A working delay is a feature, not a repair.
Any repair has a written price first.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

Sensing or Fill LightMaytag Top-Load Washer Sensing or Fill Light: Auto Sensing Is Measuring the Load SrMaytag Neptune Washer Code Sr: System Relay Problem Sud or SdMaytag Washer Code Sud or Sd: Too Many Suds, Extra Rinsing Under Way tEMaytag Neptune Washer Code tE: Sump Thermistor Reading Outside Normal Range uLMaytag Bravos Washer Code uL: Unbalanced Load, Correction Routine Running Wash Light On or FlashingMaytag Top-Load Washer Wash Light On or Flashing: Water Level Not Changing Ofb or uLMaytag Top-Load Washer Code Ofb or uL: Load Out of Balance, Hands Needed oLMaytag Top-Load Washer Code oL: Load Too Large for the Tub

1h to 12h1h to 12h questions

Is 3h an error?

No. It tells you Delay Wash is on and the cycle will begin in about three hours. No repair is needed unless the washer sets the delay by itself.

How long can I delay a load?

Most front-load washers allow up to 8 or 12 hours, depending on the model. The plus and minus buttons near the display set the time.

Why did my washer not start?

The delay was probably set by an accidental tap. Cancel it with the controls described in your owner's manual and start the cycle again. If it keeps happening, the buttons may be reading presses on their own.

Book a visit

Still unsure about 1h to 12h?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390