Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Washer

Maytag Older Front-Load Washer Code F (Other Than FH or F02): Electrical Problem

This is the catch-all F code on the older Maytag front-loading automatic washers that use a HOLD TO START control. When the display shows an F followed by anything other than H or 02, the control…

Medium · inspection needed
Book a House Call(713) 936-6390
Code
F variables other than FH and F02
Appliance
Washer
Brand
Maytag
Warranty
30-day workmanship

What F variables other than FH and F02 means

This is the catch-all F code on the older Maytag front-loading automatic washers that use a HOLD TO START control. When the display shows an F followed by anything other than H or 02, the control is reporting an electrical problem. FH and F02 have their own meanings on the same washer, so this page covers every other F combination. The cycle stops and there may be water left in the tub. It is an older platform that is still in many homes, and we repair it, and we say plainly when a repair is not worth it.

Common causes of F variables other than FH and F02

  • The wiring and connectors between the control and the motor, pump and door lock
  • The motor and drive circuit during the cycle
  • The control board itself, once the wiring checks out
✓ One safe check you can try

1. Press PAUSE/OFF twice to cancel the cycle. 2. If there is a lot of water in the tub, select DRAIN/SPIN to remove it. 3. Select the cycle again and press HOLD TO START. 4. If the same F code returns, stop using the washer and let us look at it, so a small electrical problem does not grow.

! Why to stop there
  • The display tells us the problem is electrical but not which circuit, so we trace the circuit before quoting anything
  • Water left in the tub has to be drained safely before anyone works on the machine
  • On a washer this old, we weigh the repair against the age of the machine and tell you plainly if it is not worth it
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

Ofb or uLMaytag Top-Load Washer Code Ofb or uL: Load Out of Balance, Hands Needed oLMaytag Top-Load Washer Code oL: Load Too Large for the Tub PFMaytag Washer Code PF: Cycle Interrupted by a Power Failure Rinse Light OnMaytag Top-Load Washer Rinse Light On: Spray Rinse Is Running SdMaytag Bravos Washer Code Sd: Suds Reduction Routine at the End of the Wash Sensing or Fill LightMaytag Top-Load Washer Sensing or Fill Light: Auto Sensing Is Measuring the Load SrMaytag Neptune Washer Code Sr: System Relay Problem Sud or SdMaytag Washer Code Sud or Sd: Too Many Suds, Extra Rinsing Under Way
F variables other than FH and F02F variables other than FH and F02 questions
What does an F code other than FH or F02 mean on this older Maytag washer?

It means the control found an electrical problem. FH and F02 are reported separately for water inlet and drain trouble, so any other F combination falls under this general electrical message.

Can I just cancel the cycle and try again?

Yes. Press PAUSE/OFF twice, drain the tub with DRAIN/SPIN if there is a lot of water, then pick the cycle again and press HOLD TO START. If the same code returns, the problem is real and needs a look.

Is this old front-loader worth repairing?

Often yes, but not always. We look at the machine first, give you a written price before any work, and say plainly when a repair does not make sense. Repairs carry a 30-day workmanship warranty.

Book a visit

Still seeing F variables other than FH and F02?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390