Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Washer

Maytag Washer Code F1E1: Control Stop Cleared by Power Reset

F1E1 shows on Maytag front-load HE washers (MHW models such as the MHW6630HC) and on Maytag top-load HE washers with an electronic control (such as the MVW7232HC), including the older Bravos era. The manufacturer gives no…

Medium · inspection needed
Book a House Call(713) 936-6390
Code
F1E1
Appliance
Washer
Brand
Maytag
Warranty
30-day workmanship

What F1E1 means

F1E1 shows on Maytag front-load HE washers (MHW models such as the MHW6630HC) and on Maytag top-load HE washers with an electronic control (such as the MVW7232HC), including the older Bravos era. The manufacturer gives no cause for this code. The only step on the page is to disconnect power for 5 minutes and restore it. So the control stopped the cycle for a reason the display does not name, and you see the code on a washer that quit mid-cycle or will not start.

Common causes of F1E1

  • A one-time stop that the power reset clears
  • The control and its wiring connectors, if the code repeats
  • Another circuit that the control lost contact with, which we trace with the washer running
✓ One safe check you can try

1. Unplug the washer, or turn off its circuit breaker. 2. Wait 5 minutes. 3. Restore power and start a short cycle. 4. Do not open the control or any panel yourself. If F1E1 comes back, note when in the cycle it happens, whether during fill, wash or spin, and tell us so we can test for it.

! Why to stop there
  • No cause is stated, so a repeat does not point to one part until we test
  • We run the washer and watch for the moment the control stops it
  • Because Bravos washers are older now, we weigh the repair cost against the machine and give you a straight answer
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

Rinse Light OnMaytag Top-Load Washer Rinse Light On: Spray Rinse Is Running SdMaytag Bravos Washer Code Sd: Suds Reduction Routine at the End of the Wash Sensing or Fill LightMaytag Top-Load Washer Sensing or Fill Light: Auto Sensing Is Measuring the Load SrMaytag Neptune Washer Code Sr: System Relay Problem Sud or SdMaytag Washer Code Sud or Sd: Too Many Suds, Extra Rinsing Under Way tEMaytag Neptune Washer Code tE: Sump Thermistor Reading Outside Normal Range uLMaytag Bravos Washer Code uL: Unbalanced Load, Correction Routine Running Wash Light On or FlashingMaytag Top-Load Washer Wash Light On or Flashing: Water Level Not Changing
F1E1F1E1 questions
What does F1E1 mean on my Maytag?

The manufacturer gives no meaning for it, only a power reset. The control stopped the cycle for a reason the display does not spell out, so a repeat deserves a proper look by someone who can test the washer.

How long should I leave it unplugged?

Five minutes, then restore power. That is the step given for this code. Do not take panels off or open the control yourself, because that is where the live circuits are.

What will you do if it keeps coming back?

We watch the washer run, test the control and its connections, and give you a written price before any work. Our repairs have a 30-day warranty.

Book a visit

Still seeing F1E1?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390