Error code · Washer

Maytag Front-Load Washer Code F4E4: Control Alert Left Off the List

Medium · inspection needed

Code: F4E4
Appliance: Washer
Brand: Maytag
Warranty: 30-day workmanship

What F4E4 means

F4E4 appears on Maytag front-load HE washers, the MHW models such as the MHW8630HC. Like its neighbor F4E1, the page for it states no cause and recommends only a 5-minute power reset. That means we can describe what you see, a stopped cycle and a code, but not which circuit raised it. Whether it is a one-off or a pattern is the useful clue, and it tells us where to start testing.

Common causes of F4E4

A temporary condition that the reset clears
A connection or wiring problem that comes and goes
The control board, only if the other checks are clean

✓ One safe check you can try

1. Unplug the washer or switch off its breaker. 2. Wait 5 minutes, then restore power. 3. Start a cycle and watch where it stops, if it does. 4. If F4E4 appears again, stop and call us, and tell us how many loads ran between the codes.

! Why to stop there

No cause is stated, so a hands-on test is the only way to name the circuit
How often the code returns changes where we look first
If it is an older MHW, we tell you plainly when a repair is not worth it

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

Ofb or uLMaytag Top-Load Washer Code Ofb or uL: Load Out of Balance, Hands Needed oLMaytag Top-Load Washer Code oL: Load Too Large for the Tub PFMaytag Washer Code PF: Cycle Interrupted by a Power Failure Rinse Light OnMaytag Top-Load Washer Rinse Light On: Spray Rinse Is Running SdMaytag Bravos Washer Code Sd: Suds Reduction Routine at the End of the Wash Sensing or Fill LightMaytag Top-Load Washer Sensing or Fill Light: Auto Sensing Is Measuring the Load SrMaytag Neptune Washer Code Sr: System Relay Problem Sud or SdMaytag Washer Code Sud or Sd: Too Many Suds, Extra Rinsing Under Way

F4E4F4E4 questions

What does F4E4 mean on a Maytag front-loader?

The manufacturer gives no meaning for it. The listed step is to disconnect power for 5 minutes and restore it, so we treat it as a control alert that needs testing if it repeats.

What sets it apart from F4E1?

Both have no stated meaning and the same reset step. We cannot separate them from the display alone, so we test the washer and find the circuit involved.

When should I call?

When it returns after a reset. We quote in writing before work and back repairs with a 30-day warranty. If a repair is not worth it, we say so.

Book a visit

Still seeing F4E4?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390