Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Washer

Maytag Washer Code F6E1: Only a Power Reset Listed for This Stop

F6E1 can show on Maytag front-load HE washers (MHW models such as the MHW5630HW) and on Maytag top-load HE washers with an electronic control (such as the MVW7232HC), including the older Bravos era. Neither platform has…

Medium · inspection needed
Book a House Call(713) 936-6390
Code
F6E1
Appliance
Washer
Brand
Maytag
Warranty
30-day workmanship

What F6E1 means

F6E1 can show on Maytag front-load HE washers (MHW models such as the MHW5630HW) and on Maytag top-load HE washers with an electronic control (such as the MVW7232HC), including the older Bravos era. Neither platform has a meaning stated for it. The manufacturer lists one step: disconnect power for 5 minutes and restore it. So the washer stopped for a reason it does not describe, and we do not pin it on a particular part before testing it.

Common causes of F6E1

  • A short interruption that the reset clears
  • The connection between the control and other circuits, if the code repeats
  • The control board, only after the wiring has been checked
✓ One safe check you can try

1. Pull the plug, or turn off the breaker for the washer. 2. Wait the full 5 minutes. 3. Restore power and run a cycle. 4. If F6E1 appears again, write down the model number and the time in the cycle it happened, then call us rather than resetting it over and over.

! Why to stop there
  • With no stated cause, we test the washer to find the circuit instead of replacing a guessed part
  • A code that returns on a schedule tells us more than one that appeared once
  • If the repair looks too big for an older Bravos, we say so and let you decide
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

Ofb or uLMaytag Top-Load Washer Code Ofb or uL: Load Out of Balance, Hands Needed oLMaytag Top-Load Washer Code oL: Load Too Large for the Tub PFMaytag Washer Code PF: Cycle Interrupted by a Power Failure Rinse Light OnMaytag Top-Load Washer Rinse Light On: Spray Rinse Is Running SdMaytag Bravos Washer Code Sd: Suds Reduction Routine at the End of the Wash Sensing or Fill LightMaytag Top-Load Washer Sensing or Fill Light: Auto Sensing Is Measuring the Load SrMaytag Neptune Washer Code Sr: System Relay Problem Sud or SdMaytag Washer Code Sud or Sd: Too Many Suds, Extra Rinsing Under Way
F6E1F6E1 questions
What does F6E1 mean on a Maytag?

The manufacturer states no meaning and lists only a 5-minute power reset. It is a control-level stop that we cannot tie to a specific part without testing.

Is it the same on front-loaders and top-loaders?

The guidance is the same on both: no cause, reset the power. What we check afterward depends on your model, so give us the model number when you call.

What does the repair cost?

We give a written price before any work, and we say plainly if it is not worth repairing an older washer. Work carries a 30-day warranty.

Book a visit

Still seeing F6E1?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390