Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Washer

Maytag Top-Load Washer Code Fd: Settings Returned to Factory Default

Fd stands for Factory Default on Maytag top-load HE washers with electronic control, the Bravos-era through current MVW models such as the MVW6230HW, MVW7232HC, MVWC565FW and MVWB765FW. It tells you the washer has been returned to…

Low risk · DIY check OK
Book a House Call(713) 936-6390
Code
Fd
Appliance
Washer
Brand
Maytag
Warranty
30-day workmanship

What Fd means

Fd stands for Factory Default on Maytag top-load HE washers with electronic control, the Bravos-era through current MVW models such as the MVW6230HW, MVW7232HC, MVWC565FW and MVWB765FW. It tells you the washer has been returned to its factory default settings. The display shows Fd for about three seconds, then the washer goes back to normal. It is a confirmation, not a breakdown, and it can follow a deliberate reset sequence on the keypad.

Common causes of Fd

  • A deliberate reset of options and modifiers from the keypad
  • Keys pressed by accident in a pattern that triggers the reset
  • A keypad or control that repeats the message without anyone pressing it
✓ One safe check you can try

1. Let the display return to normal; it should only show Fd for about three seconds. 2. Choose your usual cycle, temperature and options again. 3. Run a short test cycle to confirm it behaves. 4. If Fd keeps appearing on its own, unplug the washer for 5 minutes and try again.

! Why to stop there
  • If Fd keeps coming back without anyone touching the keypad, the keypad or control needs a test
  • We check whether keys are sticking before looking at the control itself
  • You get a written price first, and we tell you plainly when an older washer is not worth repairing
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

Ofb or uLMaytag Top-Load Washer Code Ofb or uL: Load Out of Balance, Hands Needed oLMaytag Top-Load Washer Code oL: Load Too Large for the Tub PFMaytag Washer Code PF: Cycle Interrupted by a Power Failure Rinse Light OnMaytag Top-Load Washer Rinse Light On: Spray Rinse Is Running SdMaytag Bravos Washer Code Sd: Suds Reduction Routine at the End of the Wash Sensing or Fill LightMaytag Top-Load Washer Sensing or Fill Light: Auto Sensing Is Measuring the Load SrMaytag Neptune Washer Code Sr: System Relay Problem Sud or SdMaytag Washer Code Sud or Sd: Too Many Suds, Extra Rinsing Under Way
FdFd questions
Is Fd an error that needs repair?

Usually not. It means the washer was returned to its factory default settings. Pick your cycle and options again and carry on as normal; nothing has broken in that case.

Why did my settings disappear?

Fd confirms that options and modifiers went back to default. That can come from a deliberate key sequence or from pressing keys by accident, so ask whether anyone touched the keypad.

When should I call you?

If Fd repeats without anyone touching the keypad. We test the keypad and control, give a written price first, and warranty the work for 30 days.

Book a visit

Still unsure about Fd?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390