Model library · Maytag Range

MES8800PZ

Maytag MES8800PZ Cooking Range Repair

Most common issues on this model

Oven that is slow to recover heat after opening the door
Burner that clicks and glows dimly
Control that responds after a delay
Door that closes with a gap at the top

Maytag’s MES8800PZ is an electric range with an electric cooktop and oven, so we have no gas valve or igniter to look at. The number is listed alone, with no color endings, so the label gives us a direct match when we order parts.

In a typical Houston installation this range sits between two cabinets and plugs into a high-amperage outlet. An oven that is slow to recover heat after the door is opened makes us check the door gap first, then the bake element and the sensor. A burner that glows dimly while clicking leads us to the switch and the socket. A control that answers after a delay is tested for supply and board trouble.

The full model and serial numbers on the tag decide which part we order. The price is written down before the work begins, and our workmanship is guaranteed for 30 days.

Key features

Maytag range powered by electricity
No pilot or igniter
Listed under a single number with no other endings

→Codes

Error codes this model can show

Probe or Insert ProbeMaytag Range Message "Insert Probe": Meat Probe Not Detected PUSH or PSHMaytag Range Prompt PUSH or PSH: Press Start Sabbath, Sab, 5Ab or 5A7Maytag Range Sabbath Mode Display: Cancel Sabbath Mode FC E8Maytag Range Code FC E8: App Registration Error Feature Not Available or Fault DetectedMaytag Range Message "Feature Not Available": Cook Cycle Entry Halted FEE6Maytag Range Code FEE6: Bake Element Circuit FEE7Maytag Range Code FEE7: Broil Element Concern Flashing Time, Clock, 12:00 or Power LossMaytag Range Flashing Clock or POWER LOSS: Reset the Time

MES8800PZMES8800PZ questions

My MES8800PZ oven loses heat every time I open the door. Is that normal?

Some loss is normal, but a slow recovery is not. We check the door seal, test the bake element and compare the oven with a thermometer to see which part is weak.

Why does a burner click but glow dimly?

The switch is calling for heat, but the element or the socket is not carrying full current. We test the element and inspect the socket for wear, and replace the weaker of the two.

Is the control delay on this range a sign of a bad board?

Not by itself. Low supply or a loose connector can slow the response. We check the outlet and connections first, then the board, and tell you the price of each option.

Book a visit

Book repair for your MES8800PZ

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 936-6390