MFT2771WEM
Maytag MFT2771WEM French Door Refrigerator Fix
Most common issues on this model
- Water filter and dispenser
- Temperature sensor readings
- Ice maker bin
- Crisper humidity vents
The Maytag MFT2771WEM is a French door refrigerator in the bottom-mount style. Two doors open onto the fresh-food side, and a drawer holds the freezer. The model number ends in letters for finish or revision, which we confirm on the data plate.
When one compartment reads warm and the other does not, we compare the readings with an independent thermometer, because electronic controls can display a value that the sensor no longer reflects. If the readings agree, we move to the fans and dampers; if they do not, we test the sensors.
Where there is a dispenser, a slow pour after a filter change is also worth a look: the filter must be locked in fully. We quote first and guarantee the work for 30 days.
Key features
- French door bottom-mount refrigerator
- Freezer drawer below
- Water filter feeding dispenser and ice maker where plumbed
- Per-compartment electronic temperature control
Error codes this model can show
My display shows a normal temperature but food is warm. Why?
The sensor may be reporting the wrong value, so the display looks fine while the compartment is not. We check with a separate thermometer and then test the sensor.
Does a filter change need any special steps?
The filter must be fully seated and locked. Air in the line can also cause spitting for a short time, and the first glasses of water should be run through to clear it.
Can you repair the ice maker?
Yes. We check the freezer temperature, the fill tube, the valve and the ice maker itself, and we replace only the part that failed, so you are not billed for a whole assembly when a single part is enough.
Book repair for your MFT2771WEM
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.