MGR4451BD
Maytag MGR4451BD Gas Range Repair
Most common issues on this model
- Oven that does not start when set
- Burner that will not shut off fully
- Heat leaking around the door
- Knob that sticks near the off position
Find MGR4451BD on a data plate and you are looking at a Maytag gas range; among its siblings are MGR4451BDB, MGR4451BDQ and MGR4451BDS, plus one more ending. Everything on it that makes heat is gas-fired.
Gas burners are normally simple, and a burner that will not shut off fully makes us suspect the valve first, because a valve that does not seal can let gas pass to the burner. We turn the gas off at the wall and test that valve closely. If the oven does not start at all, we trace the igniter and the safety valve in order, then see whether the control is sending power.
Heat leaking at the door points to the gasket or hinge. We confirm the whole number on the plate before ordering. A written quote comes first, and the work is guaranteed for thirty days.
Key features
- Maytag gas range
- Gas cooking surface and gas oven
- Related endings include MGR4451BDB, MGR4451BDQ and MGR4451BDS
Error codes this model can show
A burner on my MGR4451BD does not turn off completely. Is that safe?
No. A valve that does not seal can pass gas. Shut off the gas at the wall and call us. We test and replace the failed valve.
The oven on this gas range does not start. What do you check first?
The igniter and the safety valve. We also confirm the oven control is sending power, because a dead control can look like a bad igniter.
Why does the heat leak around my oven door?
A worn gasket or a bent hinge leaves a gap. We inspect both and restore a tight seal. Even a small gap lets heat escape and makes the oven run longer, which raises your gas use.
Book repair for your MGR4451BD
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.