Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Wall Oven

Maytag Wall Oven Code F5: Door Latch Assembly and Switches

F5 on a Maytag built-in wall oven refers to the oven door latch assembly, the door latch switches, or the wiring connecting them. The latch locks the door for self-clean and tells the control whether the…

Medium · inspection needed
Book a House Call(713) 936-6390
Code
F5
Appliance
Wall Oven
Brand
Maytag
Warranty
30-day workmanship

What F5 means

F5 on a Maytag built-in wall oven refers to the oven door latch assembly, the door latch switches, or the wiring connecting them. The latch locks the door for self-clean and tells the control whether the door is open or shut. If the control cannot confirm the latch position, it shows F5. You may find that the oven will not start a cycle, that the door will not lock or unlock, or that a cycle stops partway through. Codes with an added E digit, such as F5 E3, are separate entries.

Common causes of F5

  • Door latch assembly
  • Door latch switches
  • Wiring to the latch
✓ One safe check you can try

1. Close the oven door all the way and clear away anything caught in it, such as a dish towel or a pan handle. 2. Switch the oven's breaker off for a minute. 3. Switch it on. 4. Watch the display for F5, then run a short bake.

! Why to stop there
  • A latch can look fine and still send a bad signal to the control, so we test the switch circuit directly
  • We work out whether the latch, a switch or a wire is the cause before ordering anything
  • The price is shown to you in writing first, and the work is covered by our 30-day workmanship guarantee
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Wall Oven codes

F8 E3Maytag Wall Oven Code F8 E3: Oven Cooling Fan, Wiring and Control F8 E4, F8 E5Maytag Wall Oven Codes F8 E4 and F8 E5: Exhaust Fan Air Temperature Sensor F9 or F9 E0Maytag Wall Oven Code F9 or F9 E0: Supply Wiring Polarity Code shown as "F" and a number, beeping (older wall ovens)Maytag Older Wall Oven Code F With a Number and Beeping: Cancel, Then Power Down FC E1, FC E2, FC E3Maytag Wall Oven Codes FC E1, FC E2 and FC E3: Cannot Reach the Router FC E4, FC E5Maytag Wall Oven Codes FC E4 and FC E5: Wi-Fi Antenna Check FC E6, FC E9Maytag Wall Oven Codes FC E6 or FC E9: Wi-Fi Power Module FC E7Maytag Wall Oven Code FC E7: No Link to Your Router
F5F5 questions
Why will my oven door not open with F5 showing?

The latch may be stuck in the locked position because the control cannot confirm where it is. Do not force the door. Try the breaker reset, and call us if it stays locked.

Does plain F5 match F5 E3?

They are close. F5 E3 names the lower oven door latch assembly, and plain F5 names the oven door latch assembly. On a double oven the digit helps us pick the right door.

Can an older oven be repaired for this?

Often yes. Latch assemblies are a common repair on wall ovens that have seen many years of use. We quote first and say plainly if an older oven is not worth the cost.

Book a visit

Still seeing F5?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390