Model library · Maytag Dishwasher

MDB9600AWW

Maytag MDB9600AWW Dishwasher Service and Repair

Most common issues on this model

Cloudy glasses or residue that was not rinsed away
Odor from the tub bottom or filter area
Detergent left in the dispenser after the cycle
Noise from the pump area during the wash

This Maytag MDB9600AWW is an older built-in dishwasher for a 24-inch opening. Plenty of them remain in Houston homes, usually under the counter beside the sink, and they are still worth a look before anyone decides on a replacement.

When dishes come out cloudy or the tub smells, we begin with the sump filter and the drain path, since trapped food is the first thing that needs to go. Detergent left in the dispenser points us to the release latch and the door alignment. A noisy wash cycle sends us to the pump area and the spray arms, which share one pump housing on models of this type. If the heated dry option is weak, we test the heating path.

We read the complete model and serial number from the label before ordering parts, because older units can have revision differences. The price is written before work starts, we say honestly when a repair makes little sense, and a 30-day workmanship warranty covers our work.

Key features

Older built-in Maytag dishwasher
Sized for a 24-inch opening
Sump filter on later builds
Adjustable upper rack on some variants

→Codes

Error codes this model can show

F9E1Maytag Dishwasher Code F9E1: Slow to Drain F9E2Maytag Dishwasher Code F9E2: Drain Motor FAE4 or F10E4Maytag Dishwasher Codes FAE4 and F10E4: Diverter Valve FAE5 or F10E5Maytag Dishwasher Codes FAE5 and F10E5: Leak at the Diverter Front status light (blue / red / white / blinking; glowing red at end of Sani Rinse)Maytag Dishwasher Front Status Light: Blue, Red, White or Blinking F3E2Maytag Dishwasher Code F3E2: Thermistor or OWI Sensor H2OMaytag Dishwasher Code H2O: No Water Detected F4E2Maytag Dishwasher Code F4E2: Heating System

MDB9600AWWMDB9600AWW questions

Why do glasses look cloudy from this dishwasher?

Cloudy glasses can come from a clogged filter, weak spray, a low rinse aid supply or hard water film. We clean the filter, test spray from both arms and check the dispenser. The cause decides the fix, and you get the price first.

How do you get rid of the smell in an older dishwasher?

We remove and clean the filter area, clear the drain path and check for standing water. A hose kink or a clogged pump inlet often holds the odor. If a part is worn, we quote it in writing before replacing it.

Can you still get parts for the MDB9600AWW?

Many common parts remain available, though older units take more searching. We confirm the full model and serial number from the label first, then check the part before you approve the work. If it is not worth fixing, we say so.

Book a visit

Book repair for your MDB9600AWW

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 936-6390