Error code · Wall Oven

Maytag Wall Oven Code 1D11, 3D11, F01 or F2: Temperature Sensor Circuit

Medium · inspection needed

Code: 1d11, 1d12, 1d21, 1d22, 3d11, 3d12, 3d21, 3d22, F01, F02, F2
Appliance: Wall Oven
Brand: Maytag
Warranty: 30-day workmanship

What 1d11, 1d12, 1d21, 1d22, 3d11, 3d12, 3d21, 3d22, F01, F02, F2 means

The codes 1d11, 1d12, 1d21, 1d22, 3d11, 3d12, 3d21, 3d22, F01, F02 and F2 on a Maytag built-in wall oven point to the oven temperature sensor, the control, or the wiring between them. The control relies on the sensor to know how hot the cavity is. Without a normal reading you may see the code, uneven heating or an oven that refuses to hold temperature.

Common causes of 1d11, 1d12, 1d21, 1d22, 3d11, 3d12, 3d21, 3d22, F01, F02, F2

The oven temperature sensor and its reading
Wire and connector condition on the sensor lead
The oven control that reads the sensor

✓ One safe check you can try

1. Allow the oven to cool. 2. Turn off the circuit breaker for the wall oven and keep it off for one minute. 3. Turn the breaker back on. 4. Stay near for one minute to see if the code returns, then verify oven operation.

! Why to stop there

Sensor, wiring or control can each produce the same code, and a reset cannot separate them
We read the sensor circuit and the control output before suggesting a part
The price is written down for your approval first

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

Temperature Reached Insert FoodMaytag Steam Wall Oven Message Temperature Reached Insert Food: Preheat Done F8 E3Maytag Wall Oven Code F8 E3: Oven Cooling Fan, Wiring and Control F8 E4, F8 E5Maytag Wall Oven Codes F8 E4 and F8 E5: Exhaust Fan Air Temperature Sensor F9 or F9 E0Maytag Wall Oven Code F9 or F9 E0: Supply Wiring Polarity Code shown as "F" and a number, beeping (older wall ovens)Maytag Older Wall Oven Code F With a Number and Beeping: Cancel, Then Power Down FC E1, FC E2, FC E3Maytag Wall Oven Codes FC E1, FC E2 and FC E3: Cannot Reach the Router FC E4, FC E5Maytag Wall Oven Codes FC E4 and FC E5: Wi-Fi Antenna Check FC E6, FC E9Maytag Wall Oven Codes FC E6 or FC E9: Wi-Fi Power Module

1d11, 1d12, 1d21, 1d22, 3d11, 3d12, 3d21, 3d22, F01, F02, F21d11, 1d12, 1d21, 1d22, 3d11, 3d12, 3d21, 3d22, F01, F02, F2 questions

Does F2 always mean a bad oven sensor?

On a standard wall oven, F2 belongs to this group, where the manufacturer lists the sensor, control and wiring. Steam ovens have their own F2 entry, so the type of oven matters.

My oven bakes unevenly with this code. Is it related?

It can be. A sensor that reads wrongly makes the control heat too much or too little. We check the sensor circuit as part of the visit.

Is repair worthwhile for an older Maytag wall oven?

Often it is, because sensor circuits are modest repairs. We tell you the written price first and say honestly when a repair is not worth it.

Book a visit

Still seeing 1d11, 1d12, 1d21, 1d22, 3d11, 3d12, 3d21, 3d22, F01, F02, F2?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390