Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Wall Oven

Maytag Wall Oven Code F6 E6: Manager Board for the Upper Oven

F6 E6 on a Maytag built-in wall oven points at the upper oven appliance manager control and the wiring connected to it. On a double oven, that board supervises the top cavity. When it does not…

Medium · inspection needed
Book a House Call(713) 936-6390
Code
F6 E6
Appliance
Wall Oven
Brand
Maytag
Warranty
30-day workmanship

What F6 E6 means

F6 E6 on a Maytag built-in wall oven points at the upper oven appliance manager control and the wiring connected to it. On a double oven, that board supervises the top cavity. When it does not respond properly, the control shows F6 E6. The upper oven is the one to suspect, so you may find it will not heat or start while the lower oven carries on. Single-oven models are less likely to show this particular code.

Common causes of F6 E6

  • The upper oven appliance manager control
  • Connectors and wiring to that board
  • The main control talking to it
✓ One safe check you can try

1. Turn the oven's breaker off and wait a full minute. 2. Turn the breaker on. 3. Check whether F6 E6 returns within a minute. 4. If the display is clear, run a short bake in the upper oven, and confirm the lower oven still heats.

! Why to stop there
  • It is not yet clear whether the board itself or its wiring is the weak link
  • We test the connection before ordering a board
  • Estimate in writing before any work, and a 30-day workmanship warranty
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Wall Oven codes

Registration ErrorMaytag Wall Oven Message Registration Error: Connection Needed Temperature Reached Insert FoodMaytag Steam Wall Oven Message Temperature Reached Insert Food: Preheat Done F8 E3Maytag Wall Oven Code F8 E3: Oven Cooling Fan, Wiring and Control F8 E4, F8 E5Maytag Wall Oven Codes F8 E4 and F8 E5: Exhaust Fan Air Temperature Sensor F9 or F9 E0Maytag Wall Oven Code F9 or F9 E0: Supply Wiring Polarity Code shown as "F" and a number, beeping (older wall ovens)Maytag Older Wall Oven Code F With a Number and Beeping: Cancel, Then Power Down FC E1, FC E2, FC E3Maytag Wall Oven Codes FC E1, FC E2 and FC E3: Cannot Reach the Router FC E4, FC E5Maytag Wall Oven Codes FC E4 and FC E5: Wi-Fi Antenna Check
F6 E6F6 E6 questions
Why only the upper oven?

The code names the upper oven appliance manager, so that is where the control found the trouble. The lower oven has its own board, and may keep working normally.

Should I stop using the lower oven too?

Not necessarily. If it heats normally, you can use it carefully. If it also shows codes, stop using the oven and let us test the whole control system.

Is it worth fixing on an older double oven?

Often, yes. A board repair costs less than replacing a built-in double oven. We give the cost in writing first and say if the age of the oven makes it not worthwhile.

Book a visit

Still seeing F6 E6?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390