Model library · Maytag Wall Oven

MEW7627DS

Maytag MEW7627DS Built-In Oven Repair

Most common issues on this model

Oven called to heat but staying cool
Oven reaching the wrong temperature
Door latch that stays shut after cleaning
Cooling fan running longer than usual
Controls that react slowly

The MEW7627DS is a Maytag electric wall oven, controlled electronically with a sensor inside the cavity. Wall ovens in this style are tucked into cabinetry, so the first thing we do is make sure we can reach the oven and shut off its breaker safely.

An oven that is told to heat but stays cool is a different problem from one that reaches the wrong temperature. For the first we look at power reaching the elements, the relay and the control. For the second we compare the cavity against a thermometer and test the sensor. A cooling fan that keeps going, or a latch that stays shut after a clean cycle, each have their own small parts that we test one by one.

You get the cost in writing before we begin. We order only after reading the whole tag, and our 30-day warranty applies to the repair.

Key features

Maytag electric wall oven
Electric fuel
Electronic oven control with a cavity temperature sensor
Cooling fan that runs on after use

→Codes

Error codes this model can show

FC E4, FC E5Maytag Wall Oven Codes FC E4 and FC E5: Wi-Fi Antenna Check FC E6, FC E9Maytag Wall Oven Codes FC E6 or FC E9: Wi-Fi Power Module FC E7Maytag Wall Oven Code FC E7: No Link to Your Router FC E8Maytag Wall Oven Code FC E8: Entering the SAID Number at Setup Flashing Time, Clock, 12:00, Power Loss or Enter TimeMaytag Wall Oven Display Flashing Time, 12:00 or Power Loss: Set the Clock Locked, Lock or Loc on a Wall OvenMaytag Wall Oven Display Locked, Lock or Loc: Controls and Door Locked Please Remove and Empty ContainerMaytag Steam Wall Oven Message Please Remove and Empty Container: Drain Finished Probe or Insert Probe on a Wall OvenMaytag Wall Oven Message Probe or Insert Probe: Meat Probe Not Detected

MEW7627DSMEW7627DS questions

How do you separate a control problem from a bad element?

We check whether power reaches the element when the oven calls for heat. If it does and the element stays cold, the element itself has failed. If power never arrives, we look at the relay and control.

Can the sensor be replaced without opening the whole oven?

Typically, yes. The sensor sits in the back of the cavity and is reached from the inside, so the repair is often quick, and we quote the part in writing first.

Is there a chance the fan is normal?

Yes, because the fan is meant to run for a while after use to cool the cabinet. We only act when it keeps running for hours, rattles or never starts at all.

Book a visit

Book repair for your MEW7627DS

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 936-6390