Model library · Maytag Wall Oven

MMW5527BA

Maytag MMW5527BA Electric Wall Oven Repair

Most common issues on this model

Oven not reaching or holding the set temperature
Bake or broil element staying cold
Control panel not responding to presses
Door not closing tight against the frame

The MMW5527BA is a Maytag electric wall oven. It is built into a cabinet opening rather than sitting on a range, and the base number also turns up with the endings MMW5527BAB and MMW5527BAW, so your label may show either of those.

Wall ovens of this type are common in Houston kitchens that were remodeled with a separate cooktop. Because the oven sits at chest height behind a cabinet frame, we start with what an owner can see: how the door seals, whether the lower bake element glows, and whether the panel answers every press. Then we check the temperature sensor and the control board that reads it.

The label inside the door frame has the exact model and serial, and we check it against the parts list before anything is ordered. The price is written down and agreed first, and 30 days of workmanship cover follow the repair.

Key features

Maytag electric wall oven
Electric power
Built-in cabinet installation
Also sold as MMW5527BAB and MMW5527BAW

→Codes

Error codes this model can show

F9 or F9 E0Maytag Wall Oven Code F9 or F9 E0: Supply Wiring Polarity Code shown as "F" and a number, beeping (older wall ovens)Maytag Older Wall Oven Code F With a Number and Beeping: Cancel, Then Power Down FC E1, FC E2, FC E3Maytag Wall Oven Codes FC E1, FC E2 and FC E3: Cannot Reach the Router FC E4, FC E5Maytag Wall Oven Codes FC E4 and FC E5: Wi-Fi Antenna Check FC E6, FC E9Maytag Wall Oven Codes FC E6 or FC E9: Wi-Fi Power Module FC E7Maytag Wall Oven Code FC E7: No Link to Your Router FC E8Maytag Wall Oven Code FC E8: Entering the SAID Number at Setup Flashing Time, Clock, 12:00, Power Loss or Enter TimeMaytag Wall Oven Display Flashing Time, 12:00 or Power Loss: Set the Clock

MMW5527BAMMW5527BA questions

What makes an MMW5527BA bake unevenly?

On an electric wall oven we first check whether the bake element glows across its whole length, then the temperature sensor and the door seal. A weak element or a leaking gasket often explains a cooler oven.

Does the BAB or BAW ending change the repair?

An ending like B or W points to color or a later revision, and the odd part can differ. Reading the full number off your oven first keeps us from bringing the wrong element or board.

Can you work on a wall oven built into a cabinet?

Yes. We shut off its circuit first, slide the oven forward on its mounting, and set it back flush afterward. When the cost would pass what the oven is worth, you hear that before we start.

Book a visit

Book repair for your MMW5527BA

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 936-6390