Error code · Cooktop

Maytag Electric Cooktop Code F25: Cooktop Power Supply

An F25 code on a Maytag electric or induction cooktop means there is a problem with the power supply to the cooktop. The control is not seeing the supply it needs, so heat may stop and…

High · stop use, call now

(713) 936-6390

Code: F25
Appliance: Cooktop
Brand: Maytag
Warranty: 30-day workmanship

What F25 means

An F25 code on a Maytag electric or induction cooktop means there is a problem with the power supply to the cooktop. The control is not seeing the supply it needs, so heat may stop and the display shows the code. This applies to Maytag radiant, smoothtop and induction cooktops. The brand's instruction is a one-minute breaker reset and a one-minute watch, and if the code reoccurs, it says to contact a qualified electrician for the supply.

Common causes of F25

Breaker, fuse or supply wiring to the cooktop
Loose connection at the cooktop's terminal block
Power board that senses the supply
Voltage that drops under load

✓ One safe check you can try

1. Switch the cooktop's breaker(s) off and leave them off for one minute. 2. Switch them on. 3. Wait a minute, then check that the cooktop works. 4. If F25 reoccurs, stop trying and have a qualified electrician look at the circuit.

! Why to stop there

If the supply tests well, the cooktop's board may be the cause, and we say so plainly
We measure the supply at the cooktop to see where the problem lies
You get a written price before any part is ordered

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

LockMaytag Cooktop Lock: Control Lock Is on Other F CodeMaytag Cooktop Other F Codes: Touchpad, Power Board or Wiring UMaytag Cooktop Code U: No Pan, Keep Warm or Power Supply FC E1Maytag Cooktop Code FC E1: Touchpad or Its Wiring FC E4Maytag Cooktop Code FC E4: Harness Between Touchpad and Induction Module FC LF, FC LR, FC RF or FC RRMaytag Cooktop Codes FC LF, FC LR, FC RF and FC RR: A Hotplate or Its Wiring H or HOTMaytag Cooktop Code H or HOT: Surface Still Too Hot to Touch Indicator Lights Not Turning OnMaytag Cooktop Indicator Lights Not Turning On: Panel Dark with Power Present

F25F25 questions

Why does the guidance mention an electrician?

The code points at the power supply, which is house wiring. If it returns after a reset, a qualified electrician should check the circuit, and we check the cooktop.

Can a tripped breaker cause F25?

A breaker that is partly tripped or weak may give the cooktop too little supply. Check that the handle is fully on, reset it once if it tripped, and call us if the code still returns afterward.

Is the cooktop dangerous?

A supply problem should be treated with care. If F25 repeats, leave the cooktop off and call a qualified electrician for the circuit, and we can check the cooktop itself once the supply is confirmed.

Book a visit

Still seeing F25?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390