Error code · Cooktop

Maytag Cooktop Code H or HOT: Surface Still Too Hot to Touch

H or HOT shows in the heat-setting window on Maytag electric cooktops when any cooking area is still too hot to touch, even after you switch the area off. It is a residual-heat warning, so the…

Low risk · DIY check OK

Book a House Call (713) 936-6390

Code: H or HOT
Appliance: Cooktop
Brand: Maytag
Warranty: 30-day workmanship

What H or HOT means

H or HOT shows in the heat-setting window on Maytag electric cooktops when any cooking area is still too hot to touch, even after you switch the area off. It is a residual-heat warning, so the cooktop is behaving as designed. If the letter keeps showing or flashes after the glass has fully cooled, the cooktop may be holding a control error instead, and that is the point where a reset and then a test make sense.

Common causes of H or HOT

Normal leftover heat after cooking
A heat sensing or control circuit that is still reporting hot
Control board holding the message after cool-down

✓ One safe check you can try

1. Leave the cooktop alone until the glass is cool to the touch. 2. If H is still lit or flashing, switch off the cooktop breaker for one minute. 3. Switch the breaker on. 4. Check that the cooktop runs normally.

! Why to stop there

If H outlasts a full cool-down, a sensing circuit needs testing
We check whether the message follows the cooktop's actual temperature
We also look at whether the cooktop's temperature sensing agrees with the glass you can feel

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

Indicator or Hot Light OnMaytag Cooktop Indicator or Hot Light On: Control Left on or Element Hot LockMaytag Cooktop Lock: Control Lock Is on Other F CodeMaytag Cooktop Other F Codes: Touchpad, Power Board or Wiring UMaytag Cooktop Code U: No Pan, Keep Warm or Power Supply FC E1Maytag Cooktop Code FC E1: Touchpad or Its Wiring FC E4Maytag Cooktop Code FC E4: Harness Between Touchpad and Induction Module FC LF, FC LR, FC RF or FC RRMaytag Cooktop Codes FC LF, FC LR, FC RF and FC RR: A Hotplate or Its Wiring Indicator Lights Not Turning OnMaytag Cooktop Indicator Lights Not Turning On: Panel Dark with Power Present

H or HOTH or HOT questions

How long should H stay on after cooking?

Until the cooking area is cool enough to touch, which can take a while on a radiant element. Treat the letter as a warning not to touch the glass, not as a sign that something has broken.

When does H become a repair issue?

If it keeps showing or flashing after the surface has fully cooled and a one-minute breaker reset did not clear it, the message is no longer about residual heat.

Is it safe to wipe the cooktop while H shows?

Wait. The warning exists because the glass can still burn skin. Once the letter goes out and the glass is cool, wipe it with a cleaner made for smoothtops.

Book a visit

Still unsure about H or HOT?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390