Error code · Cooktop

Maytag Cooktop Indicator Lights Not Turning On: Panel Dark with Power Present

Medium · inspection needed

Code: Indicator Lights Not Turning On
Appliance: Cooktop
Brand: Maytag
Warranty: 30-day workmanship

What Indicator Lights Not Turning On means

Your Maytag electric cooktop has power at the house, but none of the indicator lights come on when you touch the controls. There is no owner troubleshooting step for this condition, so the useful question is where the control circuit stops responding. On the cooktop you see a dark panel with no lights, no tones, and no heat from any cooking area, though the home's other circuits are fine.

Common causes of Indicator Lights Not Turning On

Power reaching the cooktop at its own connection
Control board or touchpad not powering up
Wiring between the supply point and the board
Display itself, only after power is confirmed

✓ One safe check you can try

1. Check that other kitchen outlets and lights have power. 2. Look at the cooktop's breaker in the panel and make sure it is fully on. 3. Make sure the control lock is not on, then touch Power once. 4. If the panel stays dark, leave it off and call us.

! Why to stop there

No owner reset exists for a dark panel, so we start by confirming power at the cooktop
We then test the control board and the touchpad in order
If power is present and the panel stays dark, we can narrow it to the board or the touchpad by testing

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

LockMaytag Cooktop Lock: Control Lock Is on Other F CodeMaytag Cooktop Other F Codes: Touchpad, Power Board or Wiring UMaytag Cooktop Code U: No Pan, Keep Warm or Power Supply FC E1Maytag Cooktop Code FC E1: Touchpad or Its Wiring FC E4Maytag Cooktop Code FC E4: Harness Between Touchpad and Induction Module FC LF, FC LR, FC RF or FC RRMaytag Cooktop Codes FC LF, FC LR, FC RF and FC RR: A Hotplate or Its Wiring H or HOTMaytag Cooktop Code H or HOT: Surface Still Too Hot to Touch Indicator or Display FlashingMaytag Cooktop Indicator or Display Flashing: A Held Key or the Wrong Pan

Indicator Lights Not Turning OnIndicator Lights Not Turning On questions

Why do the lights stay off when the breaker looks fine?

A breaker can look on and still be tripped halfway, or the cause can sit in the cooktop's own power path. We test voltage at the cooktop connection first.

Can I fix this with a reset?

There is no reset step for this condition. Flipping the breaker once is harmless, but if the panel stays dark we move on to testing.

Is a dead cooktop panel worth fixing on an older cooktop?

Frequently, yes, when the cause is wiring or a connection. If the board or glass makes it uneconomical, we say so before you commit to anything.

Book a visit

Still seeing Indicator Lights Not Turning On?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390