Error code · Wall Oven

Maytag Wall Oven Codes F5 E0 to F5 E3 and F5 E7: Door Latch Family

This family of codes on Maytag built-in wall ovens, such as the MEW9527FZ and MEW5630, all concern the door. F5 E0, F5 E1 and F5 E2 point to the door latch assembly, the door switch, or…

Medium · inspection needed

Book a House Call (713) 936-6390

Code: F5 E0, F5 E1, F5 E2, F5 E3 or F5 E7
Appliance: Wall Oven
Brand: Maytag
Warranty: 30-day workmanship

What F5 E0, F5 E1, F5 E2, F5 E3 or F5 E7 means

This family of codes on Maytag built-in wall ovens, such as the MEW9527FZ and MEW5630, all concern the door. F5 E0, F5 E1 and F5 E2 point to the door latch assembly, the door switch, or their wiring. F5 E7 names the oven door latch assembly, the door switch and the wiring. F5 E3 is more specific and names the lower oven door latch on a double oven. The control cannot confirm the door state, so you may see the code, a door that will not unlock, or a cycle that will not begin.

Common causes of F5 E0, F5 E1, F5 E2, F5 E3 or F5 E7

Door latch assembly on the affected oven
Door switch
Wiring to the latch and switch
For F5 E3, the lower oven door in particular

✓ One safe check you can try

1. Close the door fully and check for anything caught in it. 2. Switch off the oven's breaker for one minute, then switch it on. 3. Watch the display for a minute to see whether the same code returns. 4. If it stays clear, run a short bake and make sure the door unlocks when the cycle ends.

! Why to stop there

Several codes lead to the same group of parts, so the exact digit mostly tells us which door to start with
We test the switch and latch circuit before recommending a part
The price is agreed in writing before any work, with a 30-day workmanship warranty on the repair

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Wall Oven codes

FC E1, FC E2, FC E3Maytag Wall Oven Codes FC E1, FC E2 and FC E3: Cannot Reach the Router FC E4, FC E5Maytag Wall Oven Codes FC E4 and FC E5: Wi-Fi Antenna Check FC E6, FC E9Maytag Wall Oven Codes FC E6 or FC E9: Wi-Fi Power Module FC E7Maytag Wall Oven Code FC E7: No Link to Your Router FC E8Maytag Wall Oven Code FC E8: Entering the SAID Number at Setup Flashing Time, Clock, 12:00, Power Loss or Enter TimeMaytag Wall Oven Display Flashing Time, 12:00 or Power Loss: Set the Clock Locked, Lock or Loc on a Wall OvenMaytag Wall Oven Display Locked, Lock or Loc: Controls and Door Locked Please Remove and Empty ContainerMaytag Steam Wall Oven Message Please Remove and Empty Container: Drain Finished

F5 E0, F5 E1, F5 E2, F5 E3 or F5 E7F5 E0, F5 E1, F5 E2, F5 E3 or F5 E7 questions

Which door does F5 E3 refer to?

The lower oven door on a double wall oven. The other codes in this family refer to the oven door in general. Tell us your code and whether you have one oven or two.

Can I use the other oven while one door shows a code?

Often you can, since each cavity has its own latch. Test the other oven with a short bake. If both show problems, the control may be involved and we check it too.

Is this repair common on older ovens?

Yes. Latches and switches see daily use and wear over many years. Many of these ovens are still worth repairing, and we tell you honestly when a repair is not sensible.

Book a visit

Still seeing F5 E0, F5 E1, F5 E2, F5 E3 or F5 E7?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390