Error code · Cooktop

Maytag Electric Cooktop Beeping or Audio Tones: Pressure on the Touchpad

Low risk · DIY check OK

Code: Beeping or Audio Tones
Appliance: Cooktop
Brand: Maytag
Warranty: 30-day workmanship

What Beeping or Audio Tones means

When a Maytag electric cooktop beeps or sounds audio tones on its own, the control is usually reading something pressing on the touchpad. Food, liquid, residue, or an object resting on the user interface can look to the control like a held key. This applies to Maytag radiant, smoothtop and induction cooktops. You hear tones and may see lights flash, and the cooktop may not respond to normal use. Clearing whatever is on the panel often silences it, and a power reset follows if the tones continue.

Common causes of Beeping or Audio Tones

Spill, food film, or moisture on the touch controls
A pot, lid, or utensil resting against the control area
Touchpad that reads a key as permanently pressed
Power reset still pending after the panel is clean

✓ One safe check you can try

1. Make sure every surface control is off. 2. Take any pan, lid, or object off the control area. 3. Wipe the touchpad with a soft damp cloth, then dry it. 4. Still beeping? Flip the cooktop's breaker(s) off for a minute and back on. 5. Stay nearby for a minute to hear whether the tones come back.

! Why to stop there

If the tones return on a clean, empty panel, the touchpad or its connection may be reading a key falsely
We test the touchpad separately from the control board so we do not replace the wrong part
The price is written down and agreed with you before any part is ordered

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

UMaytag Cooktop Code U: No Pan, Keep Warm or Power Supply FC E1Maytag Cooktop Code FC E1: Touchpad or Its Wiring FC E4Maytag Cooktop Code FC E4: Harness Between Touchpad and Induction Module FC LF, FC LR, FC RF or FC RRMaytag Cooktop Codes FC LF, FC LR, FC RF and FC RR: A Hotplate or Its Wiring H or HOTMaytag Cooktop Code H or HOT: Surface Still Too Hot to Touch Indicator Lights Not Turning OnMaytag Cooktop Indicator Lights Not Turning On: Panel Dark with Power Present Indicator or Display FlashingMaytag Cooktop Indicator or Display Flashing: A Held Key or the Wrong Pan Indicator or Hot Light OnMaytag Cooktop Indicator or Hot Light On: Control Left on or Element Hot

Beeping or Audio TonesBeeping or Audio Tones questions

Why does my cooktop beep when nobody is touching it?

The touchpad cannot tell a finger from moisture, grease, or an object pressing on it. Anything that covers a key for a few seconds can make the control sound a tone.

Will cleaning the panel fix it?

In many cases yes, especially after a spill or when a pan handle has rested on the glass. Dry the panel completely before trying the cooktop again.

Is it safe to use the cooktop while it beeps?

It is safer to leave it off until the tones stop. If you can switch everything off and the beeping carries on, turn off the breaker and call us.

Book a visit

Still unsure about Beeping or Audio Tones?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390