Error code · Cooktop

Maytag Induction Cooktop Display D E: Demo Mode Active

If a Maytag induction cooktop shows d E while it is off, demo mode is switched on. In demo mode the cooktop does not raise the heat and the cooking functions do not come on, which…

Low risk · DIY check OK

Book a House Call (713) 936-6390

Code: d E
Appliance: Cooktop
Brand: Maytag
Warranty: 30-day workmanship

What d E means

If a Maytag induction cooktop shows d E while it is off, demo mode is switched on. In demo mode the cooktop does not raise the heat and the cooking functions do not come on, which is how display units are shown in stores. It is a setting, not a failed part, and it can be left on after a power interruption or by accident. The brand's guidance for this cooktop includes steps tied to the keypad within the first minute after power is connected.

Common causes of d E

Demo mode set on the cooktop
Setting changed after power was restored
Keypad pressed during power-up
Control that needs a reset

✓ One safe check you can try

1. Turn all cooking areas off and read the display. 2. Cut power at the cooktop's breaker(s) for one minute, then restore it. 3. Keep your hands off the keypad for the first seconds after power returns. 4. See whether d E is gone and the cooktop heats. 5. If it stays, call us instead of pressing keys at random.

! Why to stop there

Pressing keys in the wrong order can change other settings, so we avoid guessing
We confirm whether the cooktop is in demo mode or showing a different message
If it is only a setting, you get a clear answer and a written price for the visit

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

FC E1Maytag Cooktop Code FC E1: Touchpad or Its Wiring FC E4Maytag Cooktop Code FC E4: Harness Between Touchpad and Induction Module FC LF, FC LR, FC RF or FC RRMaytag Cooktop Codes FC LF, FC LR, FC RF and FC RR: A Hotplate or Its Wiring H or HOTMaytag Cooktop Code H or HOT: Surface Still Too Hot to Touch Indicator Lights Not Turning OnMaytag Cooktop Indicator Lights Not Turning On: Panel Dark with Power Present Indicator or Display FlashingMaytag Cooktop Indicator or Display Flashing: A Held Key or the Wrong Pan Indicator or Hot Light OnMaytag Cooktop Indicator or Hot Light On: Control Left on or Element Hot LockMaytag Cooktop Lock: Control Lock Is on

d Ed E questions

Is d E an error?

It is a mode, not an error. Demo mode lets the display run without heating so a showroom unit can be shown safely. It does not mean the cooktop has broken.

Why would my cooktop be in demo mode at home?

It can be switched on by key presses during power-up or left from installation. It is easy to do by accident, especially after a power interruption.

Can you turn it off?

Yes. We can check the cooktop, switch the mode off if that is the cause, and confirm the heating works. You hear the price before we begin.

Book a visit

Still unsure about d E?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390