Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Maytag specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 936-6390 Book a House Call
Error code · Cooktop

Maytag Electric Cooktop Code F4: Pan Too Close to Controls

F4 on a Maytag electric or induction cooktop means a pot or pan is too close to the control panel. The panel senses the heat or presence of the pan, so the cooktop stops to protect…

Low risk · DIY check OK
Book a House Call(713) 936-6390
Code
F4
Appliance
Cooktop
Brand
Maytag
Warranty
30-day workmanship

What F4 means

F4 on a Maytag electric or induction cooktop means a pot or pan is too close to the control panel. The panel senses the heat or presence of the pan, so the cooktop stops to protect the touch controls. Center the pot or pan on the cooking area, and make sure nothing hot is resting on the touch controls. Move the pot or pan off the cooktop and wait 5 minutes for the control panel to clear. If F4 stays, a one-minute breaker reset follows.

Common causes of F4

  • Pan placed toward the control side of the cooktop
  • Hot cookware or a handle over the touch controls
  • Warmth lingering at the control panel
  • Control held in the alert until power is cycled
✓ One safe check you can try

1. Lift the pot or pan off the cooktop. 2. Wait 5 minutes for the control panel to clear. 3. When you start again, set the pan in the middle of the cooking area. 4. If F4 stays, reset the cooktop's power with a one minute pause at the breaker(s). 5. Watch the cooktop for a minute afterward.

! Why to stop there
  • If F4 returns with a cool panel and a centered pan, the panel's sensing may be the cause
  • We test the touch control and its connection
  • You see a written price first
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Cooktop codes

LockMaytag Cooktop Lock: Control Lock Is on Other F CodeMaytag Cooktop Other F Codes: Touchpad, Power Board or Wiring UMaytag Cooktop Code U: No Pan, Keep Warm or Power Supply FC E1Maytag Cooktop Code FC E1: Touchpad or Its Wiring FC E4Maytag Cooktop Code FC E4: Harness Between Touchpad and Induction Module FC LF, FC LR, FC RF or FC RRMaytag Cooktop Codes FC LF, FC LR, FC RF and FC RR: A Hotplate or Its Wiring H or HOTMaytag Cooktop Code H or HOT: Surface Still Too Hot to Touch Indicator Lights Not Turning OnMaytag Cooktop Indicator Lights Not Turning On: Panel Dark with Power Present
F4F4 questions
Why does a pan near the controls cause a code?

The control panel guards its electronics from heat. A pan too close can heat the glass near the keys, so the cooktop shuts off the heat.

How long should I wait?

About 5 minutes with the pan removed, as the brand advises. If the control panel is cool and F4 stays, use the one-minute breaker reset, and call us if the code keeps returning.

Does it damage the cooktop?

The code exists to prevent damage to the touch controls. Keep pans centered on the cooking area and handles away from the keys, and the code usually does not return.

Book a visit

Still unsure about F4?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390