Error code · Cooktop

Maytag Electric Cooktop Code FC E0: Supply, Wiring or Induction Module

High · stop use, call now

Code: FC E0
Appliance: Cooktop
Brand: Maytag
Warranty: 30-day workmanship

What FC E0 means

FC E0 on a Maytag electric or induction cooktop points to the electrical supply, the associated wiring, or the induction module. It is a broad alert about the power side of the cooktop, so the cooktop may not heat or may stop in use. This applies to Maytag electric and induction cooktops. The brand's instruction is a one-minute breaker reset and a one-minute watch to confirm the code does not display again, and a check that the cooktop works.

Common causes of FC E0

Electrical supply to the cooktop
Wiring or terminal connection
Induction module
Power board

✓ One safe check you can try

1. Shut off the cooktop's breaker(s) for one minute, then switch them back on. 2. Wait one minute for the code to return or not. 3. Try each cooking area to verify the cooktop works. 4. If FC E0 shows again, leave the cooktop off and call us.

! Why to stop there

The code spans the supply, wiring and the module, so we measure and test each in turn
We do not name the induction module until the supply and wiring have been ruled out
You approve a written price first, with a 30-day workmanship warranty

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

FC E1Maytag Cooktop Code FC E1: Touchpad or Its Wiring FC E4Maytag Cooktop Code FC E4: Harness Between Touchpad and Induction Module FC LF, FC LR, FC RF or FC RRMaytag Cooktop Codes FC LF, FC LR, FC RF and FC RR: A Hotplate or Its Wiring H or HOTMaytag Cooktop Code H or HOT: Surface Still Too Hot to Touch Indicator Lights Not Turning OnMaytag Cooktop Indicator Lights Not Turning On: Panel Dark with Power Present Indicator or Display FlashingMaytag Cooktop Indicator or Display Flashing: A Held Key or the Wrong Pan Indicator or Hot Light OnMaytag Cooktop Indicator or Hot Light On: Control Left on or Element Hot LockMaytag Cooktop Lock: Control Lock Is on

FC E0FC E0 questions

Is FC E0 only for induction cooktops?

The induction module is one of the three areas, but the code also appears for electric cooktops. We read your model and test the areas that apply.

Does the supply matter that much?

A weak supply or a loose connection can look like a module failure. We measure the supply and check the wiring first, so you do not pay for a module that is working.

Is it safe to keep trying?

Not if the code returns. Leave the cooktop off until the supply, wiring and module have been tested, because the code points to the power side of the cooktop.

Book a visit

Still seeing FC E0?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 936-6390